MOLDED PANEL DOORS
CFDP 3 – MOLDED WOOD FIBER – PRIMED FACE – MINERAL CORE
A rugged construction consisting of molded wood fiber permanently bonded to frame and core. The modulus of rupture and elasticity of the premium core is much higher than competitive products, providing less breakage during manufacturing. The weight of this premium core is lighter than competitive products, allowing for more units per shipment.
Custom grade conforming to or exceeding WDMA Industry Standard 1.S.1-A and Architectural Woodworking Institute Standards for type FD as tested per A.S.T.M.E-152 fire test of door assemblies performed by Warnock Hersey international.
Single Door: (45 and 60 Min.)
3/0 Wide 7/0 High
(Additional sizes may be available, contact factory)
Pairs (no DE):
6/0 Wide 7/0 High
Contact factory for sizing options.
Stiles: Treated maple bonded to the core.
Rails: Treated maple bonded to the core.
The purpose of inner blocking is to attach surface mounted hardware and exit devices with screws, therefore eliminating through bolts on 45 and 60 minute doors.
Mineral core is an asbestos-free, mineral-based product that meets the criteria for 45 and 60 minute fire rated doors.
1/8 inch Molded Wood Fiber Hardboard
Profile core and framed components are assembled in bonded construction.
Type 1 by specification between faces and core/frame components.
Standard Limited Warrantly.
Warranty upgrade upon request.
May be label and classified by Warnock Hersey or Underwriters Laboratories as Neutral Pressure, Positive Pressure Cat A and Cat B 45 and 60 minute.
Exterior application of this product is Not Warranted.