MODEL CSCLC 5: STRUCTURAL COMPOSITE LUMBER CORE
An all purpose door of five ply construction. Hardwood veneers are permanently bonded to crossband, wood slab, and frame. The core consists of Structural Composite Lumber that utilizes wood strands from a variety of tree species providing an alternative to dimension lumber. The material is engineered for strength and stability. While not really “lumber” it is marketed as a lumber substitute, to be used primarily in place of stave lumber core materials. SCL is tested under a number of ASTM and other test criteria. The precision surface core provides a smooth stratum for the hardwood doorskins.
Premium Grade conforming to or exceeding WDMA Industry Standard I.S. 1-A and Architectural Woodwork Institute Standards for type SCL or FD 1/3, as tested per A.S.T.M. E-152 “Fire Test of Door Assemblies” performed by Warnock Hersey International.
Single Door (unrated)
4/0 wide, 10/0 high
Pairs (unrated) 4/0 wide,
10/0 high, (8/0x10/0 opening)
Single Door (20 minute)
4/0 wide, 9/0 high
Pairs (20 minute) 4/0 wide, 9/0 high, (8/0x9/0 opening)
(Before Trim or Prefit)* one piece, clear, matching/compatible hardwood face laminated, SCL back, for painting or staining. 1-1/4" total width. Minimum specific gravity of 0.39 for stile face and back. Contact factory for other options.
(Before Trim or Prefit)* 1-3/4" SCL one piece.
Manufactured to WDMA I.S. 1-A section for Structural Composite Lumber.
All veneer species as available meeting AWI or WDMA grading rules as specified, MDO or HPL Type I or II bond as specified.
Core and frame are uniformly sized to a thickness of 1-1/2" (±.015"). Core and frame components are assembled to meet or exceed 20 minute specifications.
Type I or Type II bond, by specification, between faces and core/frame components.
Architectural Limited Warranty from date of manufacture. For original installation only.
May be labeled and classified by Warnock Hersey International or Underwriters Laboratories as a 20 minute fire/ smoke barrier. Restrictions on machining and architectural accessories or application are per governing authority.
Exterior application of this product is Not Warranted.
Extra heavy duty available.
Doors with this type of construction have been tested and received the following STC ratings:
* Fire labeled doors may not be refit in the field if already factory prefit sized. If not factory prefit for length, maximum field trim is 3/4" from the bottom only per NFPA-80, 1986, Fire Doors, Chapter 1-3.5